Shingle Roof Replacement Cost in Cleburne, Texas
A shingle roof replacement in Cleburne typically runs $5,400 – $16,000 installed — $350 – $700 per square (100 sq ft) — from 3-tab up to architectural grade, tear-off included.
New roof installs & full replacements · No obligation
Shingle roofing cost by grade.
Installed prices for a full shingle replacement in Cleburne. Roofers quote per square (100 sq ft) — a typical single-family roof runs 17–25 squares.
- 3-tab shinglesFlat profile, 15–20 year typical service$5,400 – $10,500
- Architectural shinglesDimensional, 25–30 year — the U.S. default$7,900 – $16,000
- Designer / premium shinglesSlate and shake look-alikes$12,000 – $24,500
- Underlayment & ice barrierSynthetic felt, ice & water shield where code requires$500 – $1,950
- Deck repair (plywood)Replacing rotted sheathing, priced by extent$500 – $2,500
- Tear-off & disposalOld layers off, dumpster included$1,000 – $3,000
- Permits & inspectionVaries by municipality$250 – $1,000
* Adjusted for Cleburne's labor market — an on-site measure sets the square count.
Ready to price your roof in Cleburne?
Speak with a licensed, independent roofing contractor. No obligation.
Lines: Mon–Fri 10am–7pm
What happens when you call
Call the number
Takes about two minutes — no account, no forms.
Describe your roof
Roof type, approximate size, and what you want done in Cleburne.
Talk to a licensed contractor
You get connected with an independent local roofing pro. No obligation.
Build your Cleburne estimate
Adjust the inputs below. The range updates live and is adjusted for Cleburne's labor market —-1% vs national avg.
Indicative range based on Cleburne-adjusted rates. Deck condition, flashing, and contractor overhead may shift the final invoice. Get written quotes from licensed roofing contractors before signing.
Get real quotes for this range · No obligation
Before you sign: the quote checklist
- Get quotes from at least 3 licensed roofing contractors in Cleburne.
- Make sure every quote itemizes tear-off, underlayment, flashing, and disposal.
- Verify licensing and insurance before hiring — ask for certificates, not promises.
- Ask about both the material warranty and the workmanship warranty — they differ.
Shingle Roof in Cleburne: what matters
Cleburne's location in the heart of North Texas means its roofs face a unique set of challenges. From the historic homes near the downtown square to the newer subdivisions along Highway 67, each roof tells a story of weathering hailstorms and scorching summers. The combination of intense UV exposure and sudden, severe thunderstorms can accelerate shingle wear, making replacement a common need for homeowners. Understanding what drives costs in Cleburne—from material choices to local labor rates—helps you plan for this significant investment. This guide breaks down the factors that influence shingle roof replacement costs in Cleburne, Texas, so you can approach your project with confidence.
Why Shingle Roof Replacement Costs Vary in Cleburne
Cleburne's climate is a major factor. Hailstorms, like the one in 2020 that damaged roofs across Johnson County, can necessitate full replacements. The intense Texas sun causes asphalt shingles to dry out and crack over time, reducing their lifespan. Local building codes, which follow the Texas state building code, may require specific underlayment or ventilation upgrades. Labor costs in Cleburne reflect the local market, and disposal fees for old shingles add to the total. The age and style of your home also matter—older homes near the courthouse may have complex roof designs that require more labor, while newer subdivisions often have simpler, more cost-effective roof shapes.
Cleburne by the numbers
U.S. Census Bureau · ACS- 45,772
- Population
- 11,112
- Homeowners
- $191,826
- Median home value
- $66,562
- Median income
- 1984
- Median home built
- 17,218
- Housing units
11,112 homeowner households, median home built 1984 — a housing stock where many roofs are at or past their service life. Local labor sets the rate roofers charge in Cleburne.
Common Reasons for Shingle Roof Replacement in Cleburne
Hail Damage
Cleburne sits in a hail-prone region. Hailstones can bruise or crack shingles, compromising their waterproofing and leading to leaks.
Wind Uplift
Strong winds from spring storms can lift and tear shingles, especially at roof edges and valleys. Repeated wind exposure weakens sealant strips.
UV Degradation
The intense Texas sun breaks down asphalt shingles over time, causing them to become brittle, curl, and lose granules. This reduces their ability to reflect heat.
Improper Installation
Older homes in Cleburne may have roofs installed before modern building codes were adopted, leading to issues like inadequate flashing or poor ventilation.
Algae and Moss Growth
Humid conditions in North Texas can promote algae growth on shingles, causing dark streaks. While not structural, it indicates moisture retention that can shorten shingle life.
What to Expect During a Shingle Roof Replacement in Cleburne
In Texas, roofing contractors must be licensed by the Texas Department of Licensing and Regulation (TDLR). Your local building department in Cleburne will require a permit for roof replacement. The process typically starts with an inspection to assess the existing roof structure. After measuring and ordering materials, the crew removes old shingles and underlayment, inspects the decking, and makes any necessary repairs. New underlayment, flashing, and shingles are installed, followed by a final inspection by the city. The entire project usually takes a few days, depending on weather and roof complexity.
Shingle Roof pricing near Cleburne
Shingle Roof cost questions — Cleburne
What factors affect the cost of shingle roof replacement in Cleburne?
Costs vary based on roof size, pitch, and complexity. Material choice—such as architectural vs. 3-tab shingles—also plays a role. Local labor rates, disposal fees, and permit costs add to the total. The condition of the underlying decking may require repairs, increasing the price. Additionally, Cleburne's building code may mandate specific underlayment or ventilation upgrades.
How do I choose a roofing contractor in Cleburne?
Look for a contractor licensed by the Texas Department of Licensing and Regulation (TDLR). Ask for proof of insurance and check references. Get multiple written estimates that detail materials, labor, and timeline. Avoid contractors who require full payment upfront. A reputable contractor will also handle the permit process with the city of Cleburne.
Do I need a permit for roof replacement in Cleburne?
Yes, the city of Cleburne requires a building permit for roof replacement. Your contractor should obtain the permit before starting work. The permit ensures the work meets local building codes and will be inspected by the city. Failure to pull a permit can result in fines and issues when selling your home.
When is the ideal time to replace a shingle roof in Cleburne?
Spring and fall offer milder temperatures, which are ideal for shingle installation. Shingles need warmth to seal properly, but extreme heat can make them difficult to handle. Avoid scheduling during peak storm season (late spring) if possible, as weather delays can occur. Winter is also possible, but cold temperatures may affect adhesive performance.
How long does a shingle roof replacement take in Cleburne?
A typical residential roof replacement takes 2 to 4 days, depending on the size and complexity of the roof. Weather conditions can cause delays. Your contractor should provide a timeline based on your specific roof. The process includes tear-off, deck inspection, installation, and final inspection by the city.
Get a shingle roofing quote.
3-tab or architectural — compare quotes from licensed local roofers.
Lines: Mon–Fri 10am–7pm