Shingle Roof Replacement Cost in Burbank, California
A shingle roof replacement in Burbank typically runs $6,800 – $19,500 installed — $425 – $850 per square (100 sq ft) — from 3-tab up to architectural grade, tear-off included.
New roof installs & full replacements · No obligation
Shingle roofing cost by grade.
Installed prices for a full shingle replacement in Burbank. Roofers quote per square (100 sq ft) — a typical single-family roof runs 17–25 squares.
- 3-tab shinglesFlat profile, 15–20 year typical service$6,800 – $13,000
- Architectural shinglesDimensional, 25–30 year — the U.S. default$9,900 – $19,500
- Designer / premium shinglesSlate and shake look-alikes$15,000 – $31,000
- Underlayment & ice barrierSynthetic felt, ice & water shield where code requires$600 – $2,500
- Deck repair (plywood)Replacing rotted sheathing, priced by extent$600 – $3,100
- Tear-off & disposalOld layers off, dumpster included$1,250 – $3,700
- Permits & inspectionVaries by municipality$300 – $1,250
* Adjusted for Burbank's labor market — an on-site measure sets the square count.
Ready to price your roof in Burbank?
Speak with a licensed, independent roofing contractor. No obligation.
Lines: Mon–Fri 9am–7pm
What happens when you call
Call the number
Takes about two minutes — no account, no forms.
Describe your roof
Roof type, approximate size, and what you want done in Burbank.
Talk to a licensed contractor
You get connected with an independent local roofing pro. No obligation.
Build your Burbank estimate
Adjust the inputs below. The range updates live and is adjusted for Burbank's labor market —+23% vs national avg.
Indicative range based on Burbank-adjusted rates. Deck condition, flashing, and contractor overhead may shift the final invoice. Get written quotes from licensed roofing contractors before signing.
Get real quotes for this range · No obligation
Before you sign: the quote checklist
- Get quotes from at least 3 licensed roofing contractors in Burbank.
- Make sure every quote itemizes tear-off, underlayment, flashing, and disposal.
- Verify licensing and insurance before hiring — ask for certificates, not promises.
- Ask about both the material warranty and the workmanship warranty — they differ.
Shingle Roof in Burbank: what matters
Burbank's mix of older bungalows in the Magnolia Park neighborhood and newer hillside homes in the Rancho Equestrian District means roofing needs vary widely. The city's Mediterranean climate—hot, dry summers and mild winters—puts constant UV stress on asphalt shingles. Add in the occasional Santa Ana wind event, and roofs here face a unique set of challenges. Whether you own a 1920s Craftsman or a 2000s tract home, understanding what drives replacement costs in Burbank helps you plan. This guide covers local factors like building codes, permit requirements, and typical roof life expectancies so you know what to expect.
Why Shingle Roof Replacement Costs Vary in Burbank
In Burbank, several local factors influence the final cost of a shingle roof replacement. The age and style of your home matter: older homes in neighborhoods like Magnolia Park often have complex roof lines requiring more labor and materials. California's Title 24 building energy code may require additional insulation or ventilation upgrades during a reroof. The city's permitting office requires a permit for any roof replacement, and fees are based on project valuation. Labor rates in the Los Angeles area are higher than the national average, reflecting the cost of living. Disposal of old shingles adds to the total, especially if your home is on a steep slope in the hills. Finally, the type of shingle you choose—3-tab vs. architectural—affects material costs and longevity.
Burbank by the numbers
U.S. Census Bureau · ACS- 110,457
- Population
- 19,769
- Homeowners
- $938,489
- Median home value
- $93,922
- Median income
- 1959
- Median home built
- 48,025
- Housing units
19,769 homeowner households, median home built 1959 — a housing stock where many roofs are at or past their service life. Local labor sets the rate roofers charge in Burbank.
Common Reasons Burbank Roofs Need Replacement
UV Degradation
Burbank averages over 280 sunny days per year. Constant exposure to intense UV radiation causes asphalt shingles to dry out, crack, and lose granules, reducing their ability to protect your home.
Santa Ana Wind Damage
Seasonal Santa Ana winds can gust over 50 mph in Burbank, lifting and tearing shingles. Homes in exposed areas like the Rancho Equestrian hills are especially vulnerable to wind-driven damage.
Age of Older Homes
Many Burbank homes in the Magnolia Park area were built in the 1920s–1950s. Original or second-generation roofs on these homes are often past their 20–30 year lifespan, showing widespread wear.
Poor Attic Ventilation
In Burbank's hot climate, inadequate attic ventilation traps heat, baking shingles from underneath. This accelerates aging and can void manufacturer warranties, leading to premature replacement.
Earthquake-Related Movement
Though less common, seismic activity can shift roof structures, causing gaps, lifted shingles, or broken flashing. Over time, these issues compromise the roof's integrity and require replacement.
What to Expect During a Roof Replacement in Burbank
In California, roofing contractors must hold a valid C-39 license from the Contractors State License Board. Before work begins, your contractor will pull a permit from the city's building department. The process starts with a thorough inspection and measurement of your roof. After selecting materials, the crew will tear off the old shingles, inspect the decking for rot, and make any necessary repairs. New underlayment, flashing, and shingles are installed per manufacturer specs and local building code. A final inspection by the city ensures everything meets code. The entire project typically takes 2–5 days for an average home, depending on complexity and weather.
Shingle Roof pricing near Burbank
Shingle Roof cost questions — Burbank
What factors affect shingle roof replacement cost in Burbank?
Costs depend on roof size, slope, number of layers to remove, type of shingles chosen, and local labor rates. Permits and disposal fees also add to the total. Homes with complex rooflines or in hillside areas may require more labor. Energy code upgrades can increase costs if additional insulation or ventilation is needed.
How do I choose a roofing contractor in Burbank?
Look for a contractor with a valid California C-39 license and workers' compensation insurance. Ask for local references and check their Better Business Bureau rating. Get at least three written estimates and compare scope, not just price. Avoid contractors who ask for full payment upfront. A detailed contract should include materials, timeline, and warranty information.
What are California's licensing requirements for roofers?
Roofing contractors in California must hold a C-39 classification from the Contractors State License Board. This requires passing a trade exam and a law and business exam, plus proof of experience and bonding. Always verify a license online before hiring. Unlicensed contractors are illegal and can leave you liable for injuries or code violations.
When is the ideal time to replace a shingle roof in Burbank?
Spring and fall offer mild temperatures and lower chance of rain, making them ideal for roof replacement. Summer can be very hot, which may affect adhesive curing times. Winter is generally dry in Burbank, but occasional rain can cause delays. Plan ahead to avoid peak demand seasons when contractors are busiest.
Do I need a permit for a roof replacement in Burbank?
Yes, the city of Burbank requires a building permit for any roof replacement. Your contractor typically handles the permit application. The permit ensures the work meets local building codes and includes a final inspection. Failing to pull a permit can result in fines and issues when selling your home.
Get a shingle roofing quote.
3-tab or architectural — compare quotes from licensed local roofers.
Lines: Mon–Fri 9am–7pm