Metal Roof Replacement Cost in Plymouth, Wisconsin
A metal roof replacement in Plymouth typically runs $7,500 – $37,500 installed ($5 – $15 per sq ft) — corrugated panels at the low end, standing seam at the top — tear-off and local labor included.
New roof installs & full replacements · No obligation
Metal roofing cost by panel type.
Installed prices for Plymouth, adjusted for local labor. Roof size, pitch, and trim complexity move the number within each range.
- Corrugated / exposed fastenerEntry point for metal roofing$7,500 – $18,500
- Standing seam steelConcealed fasteners, premium panel$14,000 – $37,500
- AluminumCorrosion-resistant — fits coastal climates$12,000 – $31,000
- Stone-coated steelShingle or tile look in metal$13,000 – $28,000
- Copper & zincSpecialty architectural metals$23,500 – $56,000+
- Tear-off & disposalRemoving the old roof$950 – $2,800
- Permits & inspectionVaries by municipality$225 – $950
* Adjusted for Plymouth; an on-site measure refines panel and trim counts.
Ready to price your roof in Plymouth?
Speak with a licensed, independent roofing contractor. No obligation.
Lines: Mon–Fri 10am–7pm
What happens when you call
Call the number
Takes about two minutes — no account, no forms.
Describe your roof
Roof type, approximate size, and what you want done in Plymouth.
Talk to a licensed contractor
You get connected with an independent local roofing pro. No obligation.
Build your Plymouth estimate
Adjust the inputs below. The range updates live and is adjusted for Plymouth's labor market —-6% vs national avg.
Indicative range based on Plymouth-adjusted rates. Deck condition, flashing, and contractor overhead may shift the final invoice. Get written quotes from licensed roofing contractors before signing.
Get real quotes for this range · No obligation
Before you sign: the quote checklist
- Get quotes from at least 3 licensed roofing contractors in Plymouth.
- Make sure every quote itemizes tear-off, underlayment, flashing, and disposal.
- Verify licensing and insurance before hiring — ask for certificates, not promises.
- Ask about both the material warranty and the workmanship warranty — they differ.
Metal Roof in Plymouth: what matters
Plymouth's mix of historic homes and newer subdivisions means metal roof replacement costs vary widely. The local climate—with heavy snow, occasional hail, and strong winds—drives many homeowners to consider metal for its durability. Wisconsin's building code requires specific underlayment and fastening for metal roofs, which can affect overall cost. Labor rates in Sheboygan County reflect the region's skilled trades base. Understanding these local factors helps you plan a metal roof replacement that fits your home and budget.
Why Metal Roof Replacement Costs Vary in Plymouth
Plymouth's climate directly influences metal roof replacement costs. Hail can dent certain metal panels, so thicker gauge materials are common. Snow loads require proper structural support, which may add to framing costs. Older homes in Plymouth often have complex rooflines with multiple valleys and dormers, increasing labor time. Newer subdivisions tend to have simpler designs, reducing installation complexity. Local building departments enforce Wisconsin's code for ice and water shield on eaves, a requirement that adds material cost. Disposal of old asphalt shingles also factors into the total, as local landfill fees vary.
Plymouth by the numbers
U.S. Census Bureau · ACS- 16,136
- Population
- 4,717
- Homeowners
- $222,000
- Median home value
- $74,176
- Median income
- 1974
- Median home built
- 6,560
- Housing units
4,717 homeowner households, median home built 1974 — a housing stock where many roofs are at or past their service life. Local labor sets the rate roofers charge in Plymouth.
Common Issues
Hail Damage
Plymouth experiences hailstorms that can bruise or dent metal roofs, especially thinner gauges. Over time, repeated hail impacts may compromise the roof's appearance and protective coating, leading to replacement.
Snow and Ice Dams
Heavy snow loads and ice dams are common in Plymouth winters. Ice dams can force water under metal panels, causing leaks and corrosion. Proper installation with ice and water shield is critical to prevent premature failure.
Wind Uplift
Strong winds from storms can lift metal panels if not properly fastened. In Plymouth, wind gusts can exceed 60 mph, stressing exposed fasteners and seams. Loose panels may need full replacement.
UV Degradation
Intense summer sun in Wisconsin can fade paint coatings on metal roofs. Over 20-30 years, UV exposure may cause chalking or peeling, leading homeowners to replace for aesthetic reasons.
Corrosion from Moisture
Plymouth's humid summers and freeze-thaw cycles can trap moisture under metal panels. If the protective coating is scratched or worn, rust can develop, eventually requiring replacement.
Metal Roof pricing near Plymouth
Metal Roof cost questions — Plymouth
What factors affect metal roof replacement cost in Plymouth?
Cost depends on roof size, pitch, complexity, metal type (steel, aluminum, copper), gauge thickness, and existing roof removal. Local labor rates and permit fees in Sheboygan County also play a role. Wisconsin's building code requires ice and water shield on eaves, which adds material cost. Seasonal demand can affect availability and scheduling.
How do I choose a metal roofing contractor in Plymouth?
Look for contractors licensed in Wisconsin and insured. Ask for references from local Plymouth projects. Verify they follow manufacturer installation guidelines and offer a workmanship warranty. Check with the Better Business Bureau and local building department for any complaints. Get multiple written estimates detailing materials and labor.
What are Wisconsin's licensing requirements for roofing contractors?
Wisconsin requires contractors to hold a Dwelling Contractor Credential (DCC) for work on residential buildings over $1,000. They must also register with the Department of Safety and Professional Services. Some municipalities may have additional local permits. Always verify a contractor's credentials before hiring.
When is the ideal time to replace a metal roof in Plymouth?
Late spring through early fall is ideal, as temperatures are moderate for sealant curing and safe work conditions. Winter installations are possible but may require special adhesives and careful scheduling around snow. Avoid peak storm season if possible to reduce delays.
Do I need a permit for metal roof replacement in Plymouth?
Yes, most roof replacements in Plymouth require a building permit from the city's permitting office. The contractor typically pulls the permit, which includes an inspection to ensure code compliance. Permit fees vary based on project value. Always confirm permit requirements before starting work.
Get a metal roofing quote.
Standing seam or corrugated — compare quotes from licensed local roofers.
Lines: Mon–Fri 10am–7pm