Metal Roof Replacement Cost in Bonham, Texas: What Homeowners Should Know
A metal roof replacement in Bonham typically runs $7,000 – $35,000 installed ($5 – $15 per sq ft) — corrugated panels at the low end, standing seam at the top — tear-off and local labor included.
New roof installs & full replacements · No obligation
Metal roofing cost by panel type.
Installed prices for Bonham, adjusted for local labor. Roof size, pitch, and trim complexity move the number within each range.
- Corrugated / exposed fastenerEntry point for metal roofing$7,000 – $17,500
- Standing seam steelConcealed fasteners, premium panel$13,000 – $35,000
- AluminumCorrosion-resistant — fits coastal climates$11,500 – $29,000
- Stone-coated steelShingle or tile look in metal$12,500 – $26,500
- Copper & zincSpecialty architectural metals$22,000 – $52,500+
- Tear-off & disposalRemoving the old roof$900 – $2,600
- Permits & inspectionVaries by municipality$225 – $900
* Adjusted for Bonham; an on-site measure refines panel and trim counts.
Ready to price your roof in Bonham?
Speak with a licensed, independent roofing contractor. No obligation.
Lines: Mon–Fri 10am–7pm
What happens when you call
Call the number
Takes about two minutes — no account, no forms.
Describe your roof
Roof type, approximate size, and what you want done in Bonham.
Talk to a licensed contractor
You get connected with an independent local roofing pro. No obligation.
Build your Bonham estimate
Adjust the inputs below. The range updates live and is adjusted for Bonham's labor market —-12% vs national avg.
Indicative range based on Bonham-adjusted rates. Deck condition, flashing, and contractor overhead may shift the final invoice. Get written quotes from licensed roofing contractors before signing.
Get real quotes for this range · No obligation
Before you sign: the quote checklist
- Get quotes from at least 3 licensed roofing contractors in Bonham.
- Make sure every quote itemizes tear-off, underlayment, flashing, and disposal.
- Verify licensing and insurance before hiring — ask for certificates, not promises.
- Ask about both the material warranty and the workmanship warranty — they differ.
Metal Roof in Bonham: what matters
Bonham, Texas, sits in Fannin County where the climate brings a mix of hot summers, occasional hailstorms, and strong winds. Homes here range from older farmhouses to newer subdivisions, and many homeowners consider metal roofing for its durability. If you're planning a metal roof replacement, understanding local factors helps you prepare. This guide covers what influences costs in Bonham, from weather patterns to state building codes, so you can make an informed decision. No two roofs are exactly alike, and Bonham's unique conditions mean your project will have its own considerations.
Why Metal Roof Replacement Costs Vary in Bonham
Several factors specific to Bonham affect metal roof replacement costs. The local climate—with hail, high winds, and intense UV exposure—can influence the type of metal panel and gauge needed. Older homes in Bonham may have roof pitches or decking that require additional preparation. Texas state building codes set minimum standards for wind resistance and fastening, which can affect labor and material choices. Labor availability in the Bonham area also plays a role, as does the cost of disposing of old roofing materials. Permit fees from the local building department add a small but variable amount. Each of these elements contributes to the final cost, making it important to get a detailed assessment for your specific home.
Bonham by the numbers
U.S. Census Bureau · ACS- 14,473
- Population
- 3,422
- Homeowners
- $176,600
- Median home value
- $58,790
- Median income
- 1981
- Median home built
- 5,557
- Housing units
3,422 homeowner households, median home built 1981 — a housing stock where many roofs are at or past their service life. Local labor sets the rate roofers charge in Bonham.
Common Issues
Hail Damage
Bonham experiences hailstorms that can dent metal roofs or compromise their protective coating, leading to premature replacement if the damage is widespread.
Wind Uplift
Strong winds common in North Texas can lift metal panels if not properly fastened, causing leaks and necessitating a full replacement.
UV Degradation
Intense Texas sun can cause paint fading and coating breakdown on metal roofs over time, reducing reflectivity and leading to replacement.
Thermal Expansion
Large temperature swings in Bonham cause metal to expand and contract, which can loosen fasteners and create gaps that require replacement.
Improper Installation
Older metal roofs in Bonham may have been installed without proper underlayment or flashings, leading to leaks and the need for a new system.
Metal Roof cost questions — Bonham
What factors affect metal roof replacement cost in Bonham?
Costs vary based on roof size, pitch, complexity, and the type of metal (steel, aluminum, copper). Local climate considerations like hail resistance and wind ratings influence material choices. Labor rates in the Bonham area, disposal fees, and permit costs from the local building department also play a role. Getting multiple quotes from licensed contractors helps you understand the range.
How do I choose a roofing contractor for a metal roof in Bonham?
Look for contractors with experience in metal roofing and proper Texas contractor licensing. Ask for references from local Bonham projects. Verify insurance and check for any complaints with the local building department. A good contractor will inspect your roof and provide a detailed written estimate.
What are Texas licensing requirements for roofing contractors?
Texas requires roofing contractors to have a state license from the Texas Department of Licensing and Regulation (TDLR) for certain types of work. For metal roof replacement, ensure your contractor holds the appropriate license and can provide proof. Local permits may also be required by the city's permitting office.
When is the ideal time to replace a metal roof in Bonham?
Spring and fall offer milder temperatures, which can make installation easier and potentially lower labor costs. However, metal roofs can be installed year-round in Texas. Avoid scheduling during peak storm seasons if possible. Plan ahead to allow for material availability and contractor schedules.
Do I need a permit for a metal roof replacement in Bonham?
Yes, most roof replacements require a permit from the local building department. Your contractor should handle the permit process as part of the project. Permit fees are typically based on the project value and are a standard part of the cost. Always confirm with your contractor that permits will be obtained.
Get a metal roofing quote.
Standing seam or corrugated — compare quotes from licensed local roofers.
Lines: Mon–Fri 10am–7pm