Metal Roof Replacement Cost in King, North Carolina
A metal roof replacement in King typically runs $7,000 – $35,000 installed ($5 – $15 per sq ft) — corrugated panels at the low end, standing seam at the top — tear-off and local labor included.
New roof installs & full replacements · No obligation
Metal roofing cost by panel type.
Installed prices for King, adjusted for local labor. Roof size, pitch, and trim complexity move the number within each range.
- Corrugated / exposed fastenerEntry point for metal roofing$7,000 – $17,500
- Standing seam steelConcealed fasteners, premium panel$13,000 – $35,000
- AluminumCorrosion-resistant — fits coastal climates$11,500 – $29,000
- Stone-coated steelShingle or tile look in metal$12,500 – $26,500
- Copper & zincSpecialty architectural metals$22,000 – $52,500+
- Tear-off & disposalRemoving the old roof$900 – $2,600
- Permits & inspectionVaries by municipality$225 – $900
* Adjusted for King; an on-site measure refines panel and trim counts.
Ready to price your roof in King?
Speak with a licensed, independent roofing contractor. No obligation.
Lines: Mon–Fri 10am–7pm
What happens when you call
Call the number
Takes about two minutes — no account, no forms.
Describe your roof
Roof type, approximate size, and what you want done in King.
Talk to a licensed contractor
You get connected with an independent local roofing pro. No obligation.
Build your King estimate
Adjust the inputs below. The range updates live and is adjusted for King's labor market —-12% vs national avg.
Indicative range based on King-adjusted rates. Deck condition, flashing, and contractor overhead may shift the final invoice. Get written quotes from licensed roofing contractors before signing.
Get real quotes for this range · No obligation
Before you sign: the quote checklist
- Get quotes from at least 3 licensed roofing contractors in King.
- Make sure every quote itemizes tear-off, underlayment, flashing, and disposal.
- Verify licensing and insurance before hiring — ask for certificates, not promises.
- Ask about both the material warranty and the workmanship warranty — they differ.
Metal Roof in King: what matters
King, North Carolina, sits in the Piedmont Triad region, where homes face a mix of hot, humid summers and occasional winter ice storms. Many houses in King were built in the 1990s and early 2000s, meaning original asphalt shingle roofs are now reaching their lifespan limit. Metal roofing has become a popular replacement choice for its durability against hail, wind, and UV exposure. However, the cost to replace a roof with metal in King depends on factors like roof size, pitch, and local labor rates. Understanding these variables helps homeowners plan for a long-lasting investment that suits the local climate.
Why Metal Roof Replacement Costs Vary in King
King's location in the Piedmont means it experiences a range of weather that influences roofing material choices. Hailstorms can dent softer metals, so thicker gauge panels may be recommended, affecting cost. Wind speeds during thunderstorms often exceed 60 mph, requiring additional fasteners and stronger underlayment. Snow loads are moderate but can accumulate on low-pitch roofs, necessitating proper structural support. The local housing stock includes many split-level and ranch-style homes with moderate roof complexity, which keeps labor costs predictable. North Carolina's building code mandates specific wind uplift resistance and ice dam protection measures, which add to material requirements. Labor rates in the region are competitive but can vary with demand. Disposal of old roofing materials and permit fees from the city's permitting office also contribute to the final estimate.
King by the numbers
U.S. Census Bureau · ACS- 16,678
- Population
- 5,287
- Homeowners
- $180,000
- Median home value
- $59,316
- Median income
- 1984
- Median home built
- 7,870
- Housing units
5,287 homeowner households, median home built 1984 — a housing stock where many roofs are at or past their service life. Local labor sets the rate roofers charge in King.
Common Issues
Hail Bruising
King experiences occasional hailstorms that can dent metal roofs, especially thinner gauges. Over time, accumulated bruising may compromise the roof's appearance and protective coating, leading to replacement.
Wind-Lifted Panels
Thunderstorms with gusts over 60 mph can lift improperly fastened metal panels. Repeated lifting can cause fastener fatigue and panel distortion, necessitating a full replacement.
UV Cracking
Intense summer sun in the Piedmont degrades paint and sealants on metal roofs. Cracking and fading reduce reflectivity and weather resistance, eventually requiring replacement.
Ice Dam Damage
Winter freeze-thaw cycles in King can create ice dams along eaves. Water backup can seep under metal panels, causing corrosion and rot in the underlying structure, prompting replacement.
Moss and Algae Growth
Humid summers in King encourage moss and algae on metal roofs, especially in shaded areas. While less damaging than on asphalt, growth can retain moisture and accelerate corrosion over time.
Metal Roof pricing near King
Metal Roof cost questions — King
What factors affect metal roof replacement cost in King?
Cost varies by roof size, pitch, metal type (steel, aluminum, copper), and gauge thickness. Local labor rates, disposal fees, and permit costs from the city's permitting office also play a role. Climate factors like hail risk may influence material choice, adding to the total.
How do I choose a roofing contractor for a metal roof in King?
Look for contractors licensed in North Carolina with experience installing metal roofs. Ask for references from local jobs, verify insurance, and check that they follow the state's building code. Get multiple written estimates and compare scope, not just price.
What are North Carolina's licensing requirements for roofers?
North Carolina requires general contractors to be licensed for projects over $30,000. For smaller jobs, a license may not be mandatory, but it's wise to hire a licensed contractor. Verify their license number through the state's licensing board.
When is the ideal time to replace a metal roof in King?
Spring and fall offer moderate temperatures, making installation easier and safer. Avoid peak summer heat and winter ice storms. However, metal roofs can be installed year-round with proper precautions.
Do I need a permit for metal roof replacement in King?
Yes, most roof replacements require a permit from the city's permitting office. The contractor typically handles this, but confirm it's included in your estimate. Permits ensure the work meets local building codes.
Get a metal roofing quote.
Standing seam or corrugated — compare quotes from licensed local roofers.
Lines: Mon–Fri 10am–7pm