Metal Roof Replacement Cost in Staten Island, New York
A metal roof replacement in Staten Island typically runs $9,900 – $49,500 installed ($10 – $20 per sq ft) — corrugated panels at the low end, standing seam at the top — tear-off and local labor included.
New roof installs & full replacements · No obligation
Metal roofing cost by panel type.
Installed prices for Staten Island, adjusted for local labor. Roof size, pitch, and trim complexity move the number within each range.
- Corrugated / exposed fastenerEntry point for metal roofing$9,900 – $24,500
- Standing seam steelConcealed fasteners, premium panel$18,500 – $49,500
- AluminumCorrosion-resistant — fits coastal climates$16,000 – $40,500
- Stone-coated steelShingle or tile look in metal$17,000 – $37,000
- Copper & zincSpecialty architectural metals$31,000 – $74,000+
- Tear-off & disposalRemoving the old roof$1,250 – $3,700
- Permits & inspectionVaries by municipality$300 – $1,250
* Adjusted for Staten Island; an on-site measure refines panel and trim counts.
Ready to price your roof in Staten Island?
Speak with a licensed, independent roofing contractor. No obligation.
Lines: Mon–Fri 10am–7pm
What happens when you call
Call the number
Takes about two minutes — no account, no forms.
Describe your roof
Roof type, approximate size, and what you want done in Staten Island.
Talk to a licensed contractor
You get connected with an independent local roofing pro. No obligation.
Build your Staten Island estimate
Adjust the inputs below. The range updates live and is adjusted for Staten Island's labor market —+23% vs national avg.
Indicative range based on Staten Island-adjusted rates. Deck condition, flashing, and contractor overhead may shift the final invoice. Get written quotes from licensed roofing contractors before signing.
Get real quotes for this range · No obligation
Before you sign: the quote checklist
- Get quotes from at least 3 licensed roofing contractors in Staten Island.
- Make sure every quote itemizes tear-off, underlayment, flashing, and disposal.
- Verify licensing and insurance before hiring — ask for certificates, not promises.
- Ask about both the material warranty and the workmanship warranty — they differ.
Metal Roof in Staten Island: what matters
Staten Island's mix of Victorian homes in St. George and mid-century ranches in Great Kills means metal roof replacement costs vary widely. After Superstorm Sandy, many homeowners switched to metal for its wind resistance. The borough's coastal location brings salt spray and high humidity, accelerating corrosion on standard asphalt. Metal roofs offer longevity and energy efficiency, but the upfront cost depends on your home's architecture, roof complexity, and the metal type. Understanding these local factors helps you budget realistically for a metal roof replacement in Staten Island.
Why Metal Roof Replacement Costs Vary in Staten Island
Staten Island's climate—humid summers, nor'easters, and occasional snow—demands durable materials. Homes in older neighborhoods like St. George often have steep pitches and complex rooflines, increasing labor time. Newer subdivisions may have simpler designs but require compliance with updated New York State building codes. The local labor market reflects higher wages compared to upstate areas. Permit fees from the city's permitting office and disposal of old roofing materials add to costs. Salt air near the shore may necessitate premium coatings, affecting material prices.
Staten Island by the numbers
U.S. Census Bureau · ACS- 492,925
- Population
- 116,662
- Homeowners
- $635,803
- Median home value
- $96,726
- Median income
- 1971
- Median home built
- 183,524
- Housing units
116,662 homeowner households, median home built 1971 — a housing stock where many roofs are at or past their service life. Local labor sets the rate roofers charge in Staten Island.
Common Reasons Staten Island Roofs Need Replacement
Hurricane and Nor'easter Wind Damage
Staten Island's coastal location exposes roofs to high winds from storms like Sandy and nor'easters, which can lift or tear off shingles, leading to leaks and the need for full replacement.
Salt Air Corrosion
Homes near the shore face accelerated corrosion of metal flashings and fasteners. Over time, this compromises roof integrity, making metal replacement a durable choice.
Ice Dams from Snow Melt
Winter snow and freeze-thaw cycles can create ice dams along eaves, forcing water under shingles. Repeated damage often requires a new roof with better ice and water shielding.
High Humidity and Moss Growth
Staten Island's humid summers promote moss and algae growth on asphalt shingles, trapping moisture and shortening roof life. Metal roofs resist organic growth.
Age of Older Housing Stock
Many homes in neighborhoods like St. George and Tompkinsville are over 100 years old with original roofs. These roofs often have structural issues and outdated materials, necessitating complete replacement.
What to Expect During a Metal Roof Replacement in Staten Island
Replacing a roof in Staten Island starts with a thorough inspection of your deck and structure. A licensed contractor will measure your roof, order materials, and obtain permits from the city's permitting office. The process includes tear-off of old roofing, deck repairs if needed, underlayment installation, and metal panel placement. New York requires contractors to hold a license from the state. After installation, city inspectors may verify code compliance. The timeline varies by roof size and complexity, but expect several days to a week for a typical home.
Metal Roof pricing near Staten Island
Metal Roof cost questions — Staten Island
What factors affect metal roof replacement cost in Staten Island?
Costs depend on roof size, pitch, complexity, metal type (steel, aluminum, copper), and accessibility. Labor rates in Staten Island are higher than national averages. Local building codes may require specific underlayments or wind-resistant fasteners. Disposal fees for old roofing and permit costs also add to the total.
How do I choose a roofing contractor in Staten Island?
Look for contractors licensed in New York State with experience in metal roofing. Ask for references from local homes, especially in your neighborhood. Verify insurance and check for complaints with the Better Business Bureau. Get multiple written estimates and compare scope, not just price.
Does New York require a license for roofers?
Yes, New York State requires home improvement contractors to be licensed. Additionally, Staten Island (part of New York City) may have specific registration requirements. Always ask for proof of licensing and insurance before hiring.
When is the ideal time to replace a roof in Staten Island?
Late spring through early fall offers the most consistent weather for installation. However, metal roofs can be installed in cooler months as well. Avoid scheduling during hurricane season (June–November) if possible, to reduce weather delays.
Do I need a permit for a metal roof replacement in Staten Island?
Yes, most roof replacements require a permit from the New York City Department of Buildings. Your contractor should handle the permit process. Failure to obtain permits can lead to fines and issues when selling your home.
Get a metal roofing quote.
Standing seam or corrugated — compare quotes from licensed local roofers.
Lines: Mon–Fri 10am–7pm