Metal Roof Replacement Cost in Collingswood, New Jersey
A metal roof replacement in Collingswood typically runs $8,100 – $40,500 installed ($5 – $20 per sq ft) — corrugated panels at the low end, standing seam at the top — tear-off and local labor included.
New roof installs & full replacements · No obligation
Metal roofing cost by panel type.
Installed prices for Collingswood, adjusted for local labor. Roof size, pitch, and trim complexity move the number within each range.
- Corrugated / exposed fastenerEntry point for metal roofing$8,100 – $20,000
- Standing seam steelConcealed fasteners, premium panel$15,000 – $40,500
- AluminumCorrosion-resistant — fits coastal climates$13,000 – $33,500
- Stone-coated steelShingle or tile look in metal$14,000 – $30,500
- Copper & zincSpecialty architectural metals$25,500 – $60,500+
- Tear-off & disposalRemoving the old roof$1,000 – $3,000
- Permits & inspectionVaries by municipality$250 – $1,000
* Adjusted for Collingswood; an on-site measure refines panel and trim counts.
Ready to price your roof in Collingswood?
Speak with a licensed, independent roofing contractor. No obligation.
Lines: Mon–Fri 10am–7pm
What happens when you call
Call the number
Takes about two minutes — no account, no forms.
Describe your roof
Roof type, approximate size, and what you want done in Collingswood.
Talk to a licensed contractor
You get connected with an independent local roofing pro. No obligation.
Build your Collingswood estimate
Adjust the inputs below. The range updates live and is adjusted for Collingswood's labor market —+1% vs national avg.
Indicative range based on Collingswood-adjusted rates. Deck condition, flashing, and contractor overhead may shift the final invoice. Get written quotes from licensed roofing contractors before signing.
Get real quotes for this range · No obligation
Before you sign: the quote checklist
- Get quotes from at least 3 licensed roofing contractors in Collingswood.
- Make sure every quote itemizes tear-off, underlayment, flashing, and disposal.
- Verify licensing and insurance before hiring — ask for certificates, not promises.
- Ask about both the material warranty and the workmanship warranty — they differ.
Metal Roof in Collingswood: what matters
Collingswood, New Jersey, is known for its historic Victorian homes and tree-lined streets, but those older roofs often need replacement. Metal roofing is a popular choice here due to its durability against the region's weather—heavy snow, hail, and strong winds. If you own a home in Collingswood, understanding the factors that influence metal roof replacement cost can help you plan. This guide covers local climate impacts, housing stock considerations, and New Jersey's building code requirements. Whether your home is in an older part of town or a newer subdivision, knowing what affects pricing will prepare you for your project.
Why Metal Roof Replacement Costs Vary in Collingswood
Collingswood's climate plays a major role in metal roof replacement costs. The area experiences hailstorms that can damage metal panels, requiring thicker gauge materials. Snow loads in winter demand proper structural support, which may add to labor costs. High humidity and UV exposure accelerate wear on coatings, so premium finishes are often recommended. The housing stock includes many older homes with steep-slope roofs, making installation more complex and time-consuming. New Jersey's building code requires specific underlayment and fastening methods for metal roofs, which can affect material and labor expenses. Local labor rates in Camden County and disposal fees for old roofing materials also contribute to price variation. Permit costs from the city's permitting office are another factor to consider.
Collingswood by the numbers
U.S. Census Bureau · ACS- 18,970
- Population
- 5,642
- Homeowners
- $326,400
- Median home value
- $102,491
- Median income
- 1944
- Median home built
- 9,153
- Housing units
5,642 homeowner households, median home built 1944 — a housing stock where many roofs are at or past their service life. Local labor sets the rate roofers charge in Collingswood.
Common Reasons Collingswood Roofs Need Replacement
Hail Damage
Collingswood sees frequent hailstorms that can dent metal panels or compromise protective coatings, leading to leaks and eventual replacement.
Wind-Lifted Panels
Strong winds from nor'easters can lift or loosen metal panels, especially on older installations, causing water intrusion and necessitating a new roof.
UV Degradation
Intense summer sun in New Jersey breaks down paint and coatings on metal roofs over time, reducing reflectivity and leading to corrosion.
Snow and Ice Dams
Heavy snow loads and ice dams can stress metal roof seams and fasteners, causing leaks and structural issues that require replacement.
Algae and Moss Growth
Humid conditions in Collingswood promote algae and moss on metal roofs, which can trap moisture and accelerate corrosion if not addressed.
Metal Roof pricing near Collingswood
Metal Roof cost questions — Collingswood
What factors affect metal roof replacement cost in Collingswood?
Several factors influence cost, including roof size and pitch, metal type (steel, aluminum, copper), gauge thickness, and finish quality. Local climate conditions like hail and snow loads may require upgraded materials. Labor rates in Camden County, disposal fees, and permit costs from the city's permitting office also play a role. The complexity of your roof's design, especially on older Collingswood homes, can increase installation time and cost.
How do I choose a roofing contractor in Collingswood?
Look for contractors licensed in New Jersey and insured. Ask for references from local projects, especially metal roof installations. Check their experience with the specific metal type you want. Get multiple written estimates that detail materials, labor, and timeline. Verify they pull permits through the local building department. Avoid contractors who pressure you into immediate decisions.
What are New Jersey's licensing requirements for roofers?
New Jersey requires home improvement contractors to register with the Division of Consumer Affairs. Roofers must also hold a business permit and comply with state building codes. There is no specific roofer license, but contractors must meet general contractor licensing requirements. Always verify a contractor's registration and insurance before hiring.
When is the ideal time to replace a metal roof in Collingswood?
Late spring through early fall offers the most favorable weather for roof replacement in Collingswood. Temperatures are moderate, reducing the risk of material expansion or contraction issues. Avoid winter months when snow and ice can delay work and compromise sealant adhesion. Plan ahead as contractors may be busier in summer.
Do I need a permit for metal roof replacement in Collingswood?
Yes, Collingswood requires a building permit for roof replacement. Your contractor should handle the permit application through the city's permitting office. The permit ensures the work meets New Jersey's building code for wind uplift, snow loads, and fire resistance. Failure to obtain a permit can result in fines and issues when selling your home.
Get a metal roofing quote.
Standing seam or corrugated — compare quotes from licensed local roofers.
Lines: Mon–Fri 10am–7pm