Metal Roof Replacement Cost in Cedar, Minnesota: What Homeowners Should Know
A metal roof replacement in Cedar typically runs $8,100 – $40,500 installed ($5 – $20 per sq ft) — corrugated panels at the low end, standing seam at the top — tear-off and local labor included.
New roof installs & full replacements · No obligation
Metal roofing cost by panel type.
Installed prices for Cedar, adjusted for local labor. Roof size, pitch, and trim complexity move the number within each range.
- Corrugated / exposed fastenerEntry point for metal roofing$8,100 – $20,000
- Standing seam steelConcealed fasteners, premium panel$15,000 – $40,500
- AluminumCorrosion-resistant — fits coastal climates$13,000 – $33,500
- Stone-coated steelShingle or tile look in metal$14,000 – $30,500
- Copper & zincSpecialty architectural metals$25,500 – $60,500+
- Tear-off & disposalRemoving the old roof$1,000 – $3,000
- Permits & inspectionVaries by municipality$250 – $1,000
* Adjusted for Cedar; an on-site measure refines panel and trim counts.
Ready to price your roof in Cedar?
Speak with a licensed, independent roofing contractor. No obligation.
Lines: Mon–Fri 10am–7pm
What happens when you call
Call the number
Takes about two minutes — no account, no forms.
Describe your roof
Roof type, approximate size, and what you want done in Cedar.
Talk to a licensed contractor
You get connected with an independent local roofing pro. No obligation.
Build your Cedar estimate
Adjust the inputs below. The range updates live and is adjusted for Cedar's labor market —+1% vs national avg.
Indicative range based on Cedar-adjusted rates. Deck condition, flashing, and contractor overhead may shift the final invoice. Get written quotes from licensed roofing contractors before signing.
Get real quotes for this range · No obligation
Before you sign: the quote checklist
- Get quotes from at least 3 licensed roofing contractors in Cedar.
- Make sure every quote itemizes tear-off, underlayment, flashing, and disposal.
- Verify licensing and insurance before hiring — ask for certificates, not promises.
- Ask about both the material warranty and the workmanship warranty — they differ.
Metal Roof in Cedar: what matters
Cedar, Minnesota, sits in Anoka County where winters bring heavy snow loads and summers can deliver intense UV and occasional hail. For homeowners considering a metal roof replacement, understanding how local conditions affect the project is key. Metal roofs are a durable option for this climate, but the cost to replace one depends on your home's size, roof complexity, and the specific metal material chosen. In Cedar, many homes were built in the 1970s through 1990s, meaning original roofs may now be reaching end of life. Whether you're replacing an aging asphalt shingle roof or upgrading from another material, a metal roof can offer longevity and performance. This guide covers what influences metal roof replacement costs in Cedar, common reasons roofs need replacement, and answers to frequently asked questions about the process.
Why Metal Roof Replacement Costs Vary in Cedar
Several factors unique to Cedar and Minnesota influence metal roof replacement costs. The climate is a major driver: heavy snow loads require roofs to meet structural capacity, and metal panels must be installed with proper snow guards and ice dam prevention. Hail and high winds are common in the region, so thicker gauge metal and impact-resistant coatings may be recommended, affecting material costs. The age of Cedar's housing stock—many homes from the 1970s–1990s—means roof decks may need repairs or reinforcement before new metal can be installed. Labor availability in the northern metro area can also affect pricing, as can disposal fees for old roofing materials. Minnesota's state building code sets requirements for wind uplift and snow load, which contractors must follow. Finally, permit fees from the city's permitting office add a small but consistent cost.
Cedar by the numbers
U.S. Census Bureau · ACS- 11,003
- Population
- 3,717
- Homeowners
- $353,700
- Median home value
- $126,198
- Median income
- 1988
- Median home built
- 3,995
- Housing units
3,717 homeowner households, median home built 1988 — a housing stock where many roofs are at or past their service life. Local labor sets the rate roofers charge in Cedar.
Common Reasons Cedar Homes Need Metal Roof Replacement
Hail Damage
Cedar experiences hailstorms that can bruise or crack metal panels, especially older, thinner gauges. Over time, accumulated hail impacts can compromise the roof's watertight integrity.
Wind Uplift
Strong winds common in Minnesota can lift improperly fastened metal panels, causing fastener fatigue or panel distortion. This often leads to leaks and the need for replacement.
Snow Load Stress
Heavy snow accumulation on roofs can cause metal panels to buckle or seams to separate if the structure wasn't designed for the load. Repeated stress shortens the roof's lifespan.
UV Degradation
Intense summer sun and UV exposure can fade paint coatings and cause metal to expand and contract. Over years, this thermal cycling can lead to fastener loosening and panel warping.
Ice Dam Damage
Ice dams at eaves can force water under metal panels, leading to corrosion of fasteners and deck rot. Proper ice and water shield installation is critical, but older roofs may lack it.
Metal Roof pricing near Cedar
Metal Roof cost questions — Cedar
What factors affect metal roof replacement cost in Cedar?
Costs vary based on roof size, pitch, complexity, and the type of metal (steel, aluminum, copper). Local climate considerations like snow load and hail resistance may require thicker panels or special coatings. Labor rates in the northern metro area, disposal fees for old roofing, and permit costs from the city's permitting office also play a role. The condition of the existing roof deck can add to the total if repairs are needed.
How do I choose a contractor for a metal roof replacement in Cedar?
Look for contractors licensed in Minnesota and experienced with metal roofing in cold climates. Ask for references from local projects and verify they carry liability insurance and workers' compensation. Check that they understand snow load requirements and proper ice dam prevention. Avoid contractors who pressure you into immediate decisions or offer unusually low estimates.
What are Minnesota's licensing requirements for roofing contractors?
Minnesota requires residential roofers to hold a state contractor license from the Department of Labor and Industry. This includes passing a trade exam and meeting financial responsibility requirements. Always verify a contractor's license number before hiring. Local permits are handled through the city's permitting office, which may have additional requirements.
When is the ideal time to replace a metal roof in Cedar?
Late spring through early fall is the ideal time, as temperatures are mild and dry conditions allow for proper sealant curing. Winter installations are possible but can be complicated by cold weather affecting adhesives and metal expansion. Scheduling early in the season helps avoid delays from summer storms.
Do I need a permit for a metal roof replacement in Cedar?
Yes, most roof replacements require a permit from the city's permitting office. The contractor typically handles this, but you should confirm. Permits ensure the work meets Minnesota's building code for snow load and wind resistance. The cost is usually modest and included in the contractor's estimate.
Get a metal roofing quote.
Standing seam or corrugated — compare quotes from licensed local roofers.
Lines: Mon–Fri 10am–7pm