Metal Roof Replacement Cost in Jacksonville, Florida
A metal roof replacement in Jacksonville typically runs $8,800 – $44,000 installed ($10 – $20 per sq ft) — corrugated panels at the low end, standing seam at the top — tear-off and local labor included.
New roof installs & full replacements · No obligation
Metal roofing cost by panel type.
Installed prices for Jacksonville, adjusted for local labor. Roof size, pitch, and trim complexity move the number within each range.
- Corrugated / exposed fastenerEntry point for metal roofing$8,800 – $22,000
- Standing seam steelConcealed fasteners, premium panel$16,500 – $44,000
- AluminumCorrosion-resistant — fits coastal climates$14,500 – $36,500
- Stone-coated steelShingle or tile look in metal$15,500 – $33,000
- Copper & zincSpecialty architectural metals$27,500 – $66,000+
- Tear-off & disposalRemoving the old roof$1,100 – $3,300
- Permits & inspectionVaries by municipality$275 – $1,100
* Adjusted for Jacksonville; an on-site measure refines panel and trim counts.
Ready to price your roof in Jacksonville?
Speak with a licensed, independent roofing contractor. No obligation.
Lines: Mon–Fri 10am–7pm
What happens when you call
Call the number
Takes about two minutes — no account, no forms.
Describe your roof
Roof type, approximate size, and what you want done in Jacksonville.
Talk to a licensed contractor
You get connected with an independent local roofing pro. No obligation.
Build your Jacksonville estimate
Adjust the inputs below. The range updates live and is adjusted for Jacksonville's labor market —+10% vs national avg.
Indicative range based on Jacksonville-adjusted rates. Deck condition, flashing, and contractor overhead may shift the final invoice. Get written quotes from licensed roofing contractors before signing.
Get real quotes for this range · No obligation
Before you sign: the quote checklist
- Get quotes from at least 3 licensed roofing contractors in Jacksonville.
- Make sure every quote itemizes tear-off, underlayment, flashing, and disposal.
- Verify licensing and insurance before hiring — ask for certificates, not promises.
- Ask about both the material warranty and the workmanship warranty — they differ.
Metal Roof in Jacksonville: what matters
Jacksonville's coastal climate—with its humid summers, frequent thunderstorms, and the occasional hurricane—puts roofs to the test. Many homes in neighborhoods like Riverside and Avondale feature older roofs that are now reaching the end of their service life. If you're considering a metal roof replacement, understanding the local factors that influence cost is key. From the city's building code requirements to the specific challenges of Florida's sun and salt air, this guide covers what Jacksonville homeowners need to know. We'll walk through why prices vary, common issues that lead to replacement, and what to expect during the process.
Why Metal Roof Replacement Costs Vary in Jacksonville
Several factors unique to Jacksonville affect the cost of a metal roof replacement. The city's humid subtropical climate means roofs must withstand high UV exposure, heavy rain, and wind speeds that can exceed 100 mph during storms. Florida's building code requires specific wind uplift ratings and impact resistance, especially in coastal zones. The age and style of your home also matter—older homes in historic districts may have complex roof geometries that increase labor time. Labor rates in Jacksonville reflect the local cost of living and demand for skilled roofers. Finally, disposal of old roofing materials and permit fees from the city's permitting office add to the total.
Jacksonville by the numbers
U.S. Census Bureau · ACS- 935,173
- Population
- 211,389
- Homeowners
- $240,998
- Median home value
- $65,946
- Median income
- 1984
- Median home built
- 407,773
- Housing units
211,389 homeowner households, median home built 1984 — a housing stock where many roofs are at or past their service life. Local labor sets the rate roofers charge in Jacksonville.
Common Reasons Jacksonville Roofs Need Replacement
UV Degradation
Intense Florida sun breaks down asphalt shingles over time, causing cracking and granule loss. Metal roofs resist UV better, but if your current roof is asphalt, UV damage is a common reason for replacement.
Wind Damage
Jacksonville experiences strong winds from thunderstorms and hurricanes. High winds can lift shingles or cause metal panels to loosen, leading to leaks and the need for a full replacement.
Moisture and Mold
Humidity and frequent rain create conditions for mold, mildew, and rot. In older homes, inadequate ventilation can accelerate deterioration, making replacement necessary.
Salt Air Corrosion
Homes near the coast are exposed to salt-laden air, which can corrode metal components. For metal roofs, proper coatings are essential; without them, corrosion can shorten lifespan.
Age and Wear
Many Jacksonville homes have roofs that are 20+ years old. Even with maintenance, materials eventually reach the end of their service life, and replacement becomes the practical choice.
What to Expect During a Metal Roof Replacement in Jacksonville
In Florida, roofing contractors must be licensed by the state. Your contractor will handle permits with the local building department. The process begins with an inspection and measurement of your roof. After selecting materials, the old roof is removed and the decking is inspected for damage. Underlayment is installed, followed by the metal panels or shingles. Flashing around chimneys, vents, and skylights is carefully sealed. A final inspection by city inspectors ensures compliance with Florida's building code. The entire project typically takes several days to a week, depending on roof size and complexity.
Metal Roof pricing near Jacksonville
Metal Roof cost questions — Jacksonville
What factors affect metal roof replacement cost in Jacksonville?
Cost depends on roof size, pitch, complexity, and the type of metal (steel, aluminum, copper). Local labor rates, permit fees, and disposal costs also play a role. Florida's building code may require additional reinforcements for wind resistance, which can increase material and labor costs. The condition of the existing roof deck and any necessary repairs will also affect the final price.
How do I choose a roofing contractor in Jacksonville?
Look for a contractor licensed in Florida with experience in metal roofing. Check references and online reviews, and verify they carry liability insurance and workers' compensation. Ask about their process for handling permits and inspections. A reputable contractor will provide a detailed written estimate and explain the timeline. Avoid contractors who pressure you to sign immediately or ask for full payment upfront.
What are Florida's licensing requirements for roofers?
In Florida, roofing contractors must hold a state-issued license from the Department of Business and Professional Regulation (DBPR). They must pass exams and meet experience requirements. Additionally, some local jurisdictions may have their own licensing. Always verify a contractor's license number on the DBPR website before hiring.
When is the ideal time to replace a metal roof in Jacksonville?
The ideal time is during the drier months, typically from late fall to early spring (November through April). This avoids the peak of hurricane season and the summer rainy period. However, metal roofs can be installed year-round as long as weather conditions are safe. Scheduling in advance is recommended, as contractors may be busier during the cooler months.
Do I need a permit for a metal roof replacement in Jacksonville?
Yes, most roof replacements in Jacksonville require a permit from the city's permitting office. Your contractor should handle this as part of the project. The permit ensures the work meets Florida's building code for wind resistance and safety. After installation, an inspection is typically required to finalize the permit.
Get a metal roofing quote.
Standing seam or corrugated — compare quotes from licensed local roofers.
Lines: Mon–Fri 10am–7pm