Metal Roof Replacement Cost in Fontana, California
A metal roof replacement in Fontana typically runs $9,900 – $49,500 installed ($10 – $20 per sq ft) — corrugated panels at the low end, standing seam at the top — tear-off and local labor included.
New roof installs & full replacements · No obligation
Metal roofing cost by panel type.
Installed prices for Fontana, adjusted for local labor. Roof size, pitch, and trim complexity move the number within each range.
- Corrugated / exposed fastenerEntry point for metal roofing$9,900 – $24,500
- Standing seam steelConcealed fasteners, premium panel$18,500 – $49,500
- AluminumCorrosion-resistant — fits coastal climates$16,000 – $40,500
- Stone-coated steelShingle or tile look in metal$17,000 – $37,000
- Copper & zincSpecialty architectural metals$31,000 – $74,000+
- Tear-off & disposalRemoving the old roof$1,250 – $3,700
- Permits & inspectionVaries by municipality$300 – $1,250
* Adjusted for Fontana; an on-site measure refines panel and trim counts.
Ready to price your roof in Fontana?
Speak with a licensed, independent roofing contractor. No obligation.
Lines: Mon–Fri 9am–7pm
What happens when you call
Call the number
Takes about two minutes — no account, no forms.
Describe your roof
Roof type, approximate size, and what you want done in Fontana.
Talk to a licensed contractor
You get connected with an independent local roofing pro. No obligation.
Build your Fontana estimate
Adjust the inputs below. The range updates live and is adjusted for Fontana's labor market —+23% vs national avg.
Indicative range based on Fontana-adjusted rates. Deck condition, flashing, and contractor overhead may shift the final invoice. Get written quotes from licensed roofing contractors before signing.
Get real quotes for this range · No obligation
Before you sign: the quote checklist
- Get quotes from at least 3 licensed roofing contractors in Fontana.
- Make sure every quote itemizes tear-off, underlayment, flashing, and disposal.
- Verify licensing and insurance before hiring — ask for certificates, not promises.
- Ask about both the material warranty and the workmanship warranty — they differ.
Metal Roof in Fontana: what matters
Fontana's hot inland climate and occasional Santa Ana winds put unique demands on roofing materials. Many homes in neighborhoods like North Fontana and the older areas near Sierra Avenue have roofs that have weathered decades of intense sun and seasonal gusts. When it's time to replace, metal roofing offers durability and energy efficiency. Understanding the factors that influence cost—from material choice to local building codes—helps you plan your project with confidence. This guide covers what Fontana homeowners need to know about metal roof replacement, without focusing on specific price figures.
Why Metal Roof Replacement Costs Vary in Fontana
Several local factors affect the cost of a metal roof replacement in Fontana. The region's hot, dry climate means roofs endure high UV exposure, which can accelerate wear on certain metal coatings. Homes in older neighborhoods may require structural reinforcement to support heavier metal panels. California's building code mandates specific wind uplift and fire resistance ratings, which can influence material selection. Labor costs reflect the local market, and disposal fees for old roofing materials add to the total. Permit fees from the city's permitting office also vary by project scope. Each of these elements contributes to the final cost, making every replacement unique.
Fontana by the numbers
U.S. Census Bureau · ACS- 234,567
- Population
- 40,844
- Homeowners
- $488,875
- Median home value
- $94,837
- Median income
- 1987
- Median home built
- 62,997
- Housing units
40,844 homeowner households, median home built 1987 — a housing stock where many roofs are at or past their service life. Local labor sets the rate roofers charge in Fontana.
Common Reasons Fontana Roofs Need Replacement
UV Degradation
Intense year-round sun in Fontana breaks down asphalt shingles and metal coatings over time, leading to cracking and loss of reflectivity.
Wind Damage
Santa Ana winds can lift and tear roofing materials, especially on older homes in exposed areas like the foothills near the San Bernardino National Forest.
Thermal Expansion
Large temperature swings between hot days and cool nights cause metal panels to expand and contract, stressing fasteners and seams.
Hail Impact
While not frequent, hailstorms in the Inland Empire can dent softer metal roofs and compromise their protective coating.
Age and Wear
Many Fontana homes built in the 1970s and 1980s have original roofs that have reached the end of their service life, showing widespread deterioration.
What to Expect During a Metal Roof Replacement in Fontana
In California, roofing contractors must hold a valid state license (C-39 for roofing). Your contractor will pull permits with the local building department, which typically requires a site plan and load calculations. The process begins with an inspection and measurement, followed by tear-off of the old roof. Underlayment and flashings are installed, then metal panels are fitted and secured. A final inspection by city inspectors ensures compliance with the state of California's building code. Expect the project to take one to two weeks, depending on roof complexity and weather.
Metal Roof pricing near Fontana
Metal Roof cost questions — Fontana
What factors affect metal roof replacement cost in Fontana?
Cost depends on roof size and pitch, metal type (steel, aluminum, copper), coating quality, and complexity of the design. Local labor rates, permit fees, and disposal costs also play a role. The condition of the existing roof and any necessary structural upgrades can add to the total.
How do I choose a roofing contractor in Fontana?
Look for a contractor with a valid California C-39 license, liability insurance, and workers' compensation. Check references and online reviews. Ask for a detailed written estimate that includes materials, labor, permits, and cleanup. Avoid contractors who demand full payment upfront.
What are California's licensing requirements for roofers?
Roofing contractors in California must hold a C-39 license from the Contractors State License Board. This requires passing a trade exam and a law and business exam, plus proof of experience and financial solvency. Always verify a license online before hiring.
When is the ideal time to replace a metal roof in Fontana?
Spring and fall offer mild temperatures, which is ideal for installation. Summer heat can make work uncomfortable and affect sealant curing. Winter rains can cause delays. Plan ahead to avoid the peak season when contractors are busiest.
Do I need a permit for a metal roof replacement in Fontana?
Yes, most roof replacements require a permit from the city's permitting office. Your contractor should handle the permit application. The permit ensures the work meets the state of California's building code for wind uplift, fire resistance, and structural safety.
Get a metal roofing quote.
Standing seam or corrugated — compare quotes from licensed local roofers.
Lines: Mon–Fri 9am–7pm