Metal Roof Replacement Cost in Bentonville, Arkansas
A metal roof replacement in Bentonville typically runs $8,800 – $44,000 installed ($10 – $20 per sq ft) — corrugated panels at the low end, standing seam at the top — tear-off and local labor included.
New roof installs & full replacements · No obligation
Metal roofing cost by panel type.
Installed prices for Bentonville, adjusted for local labor. Roof size, pitch, and trim complexity move the number within each range.
- Corrugated / exposed fastenerEntry point for metal roofing$8,800 – $22,000
- Standing seam steelConcealed fasteners, premium panel$16,500 – $44,000
- AluminumCorrosion-resistant — fits coastal climates$14,500 – $36,500
- Stone-coated steelShingle or tile look in metal$15,500 – $33,000
- Copper & zincSpecialty architectural metals$27,500 – $66,000+
- Tear-off & disposalRemoving the old roof$1,100 – $3,300
- Permits & inspectionVaries by municipality$275 – $1,100
* Adjusted for Bentonville; an on-site measure refines panel and trim counts.
Ready to price your roof in Bentonville?
Speak with a licensed, independent roofing contractor. No obligation.
Lines: Mon–Fri 10am–7pm
What happens when you call
Call the number
Takes about two minutes — no account, no forms.
Describe your roof
Roof type, approximate size, and what you want done in Bentonville.
Talk to a licensed contractor
You get connected with an independent local roofing pro. No obligation.
Build your Bentonville estimate
Adjust the inputs below. The range updates live and is adjusted for Bentonville's labor market —+10% vs national avg.
Indicative range based on Bentonville-adjusted rates. Deck condition, flashing, and contractor overhead may shift the final invoice. Get written quotes from licensed roofing contractors before signing.
Get real quotes for this range · No obligation
Before you sign: the quote checklist
- Get quotes from at least 3 licensed roofing contractors in Bentonville.
- Make sure every quote itemizes tear-off, underlayment, flashing, and disposal.
- Verify licensing and insurance before hiring — ask for certificates, not promises.
- Ask about both the material warranty and the workmanship warranty — they differ.
Metal Roof in Bentonville: what matters
If you own a home in Bentonville, you know the weather here can be tough on roofs. From spring hailstorms that dent asphalt shingles to summer UV rays that bake roofing materials, many homeowners in neighborhoods like the Historic District or newer subdivisions near the Razorback Regional Greenway are considering metal roofs for their durability. Metal roofing is a long-term investment that can handle Bentonville's freeze-thaw cycles and high winds better than traditional shingles. This guide explains what affects metal roof replacement costs in Bentonville, so you can plan your project with confidence. We'll cover local climate factors, Arkansas building codes, and what to expect during installation.
Why Metal Roof Replacement Costs Vary in Bentonville
Several factors unique to Bentonville influence the cost of a metal roof replacement. The local climate—frequent hailstorms, high winds, and intense summer sun—means you'll want a thicker gauge metal and a durable finish, which can increase material costs. The age and style of your home matter: older homes in the downtown area may have complex roof geometries that require more labor, while newer subdivisions often have simpler pitches. Arkansas's building code requires permits and inspections, adding administrative fees. Labor costs reflect the local market, and disposal of old roofing materials is regulated. Finally, the type of metal (steel, aluminum, copper) and panel style (standing seam, corrugated) affect the final price.
Bentonville by the numbers
U.S. Census Bureau · ACS- 38,006
- Population
- 8,568
- Homeowners
- $352,600
- Median home value
- $95,071
- Median income
- 1998
- Median home built
- 15,903
- Housing units
8,568 homeowner households, median home built 1998 — a housing stock where many roofs are at or past their service life. Local labor sets the rate roofers charge in Bentonville.
Common Reasons Bentonville Homes Need Metal Roof Replacement
Hail Damage
Bentonville experiences frequent hailstorms that can dent or crack asphalt shingles, leading to leaks. Metal roofs resist hail better, but older metal roofs may show cosmetic damage over time.
Wind Uplift
High winds from spring storms can lift and tear off shingles. Metal panels, if not properly installed, can also fail at seams. Replacement is needed when wind damage compromises the roof's integrity.
UV Degradation
Intense Arkansas sun causes asphalt shingles to crack and lose granules. Metal roofs reflect UV rays, but paint finishes can fade or chalk after years of exposure, prompting replacement.
Ice Dams and Freeze-Thaw
Winter freeze-thaw cycles in Bentonville can create ice dams that force water under shingles. Metal roofs shed snow more effectively, but improper underlayment can still lead to leaks.
Algae and Moss Growth
Humid conditions in Northwest Arkansas promote algae and moss on roofs, which can trap moisture and degrade shingles. Metal roofs are less susceptible, but organic growth can occur on panels in shaded areas.
What to Expect During a Metal Roof Replacement in Bentonville
In Arkansas, roofing contractors must be licensed by the state, so verify your contractor's credentials before hiring. Your local building department in Bentonville will require a permit for a full roof replacement. The process begins with an inspection and measurement of your roof. After selecting materials, the crew removes the old roofing and inspects the decking for damage. They install underlayment, flashings, and the metal panels, followed by trim and ridge caps. A final inspection by the city ensures compliance with the state building code. The entire project typically takes several days to a week, depending on roof size and complexity.
Metal Roof pricing near Bentonville
Metal Roof cost questions — Bentonville
What factors affect metal roof replacement cost in Bentonville?
Costs depend on roof size, pitch, complexity, metal type (steel vs. aluminum), gauge thickness, and finish. Local labor rates, permit fees, and disposal costs also play a role. The condition of your existing roof deck and any necessary repairs will add to the total. Seasonal demand can influence scheduling, but prices are generally stable.
How do I choose a roofing contractor in Bentonville?
Look for a contractor with a valid Arkansas contractor license, liability insurance, and worker's compensation. Ask for references from recent metal roof installations in the area. Check reviews and verify their experience with metal roofing specifically. Get multiple written estimates and compare scope of work, not just price.
What are Arkansas's licensing requirements for roofers?
Arkansas requires roofing contractors to hold a state license from the Contractors Licensing Board. This includes passing an exam and providing proof of insurance. Local permits are handled by the city of Bentonville. Always confirm your contractor's license is current before signing a contract.
When is the ideal time to replace a metal roof in Bentonville?
Late spring and fall offer mild temperatures, which is ideal for installation. Summer can be hot for workers, but metal roofs can be installed year-round as long as conditions are dry. Avoid scheduling during peak storm season (March-May) if possible, to reduce weather delays.
Do I need a permit for a metal roof replacement in Bentonville?
Yes, the city of Bentonville requires a building permit for roof replacements. Your contractor typically handles this. The permit ensures the work meets Arkansas building codes and includes inspections. Skipping permits can lead to fines and issues when selling your home.
Get a metal roofing quote.
Standing seam or corrugated — compare quotes from licensed local roofers.
Lines: Mon–Fri 10am–7pm